myblog

ebay wireless gsm alarm burglar system

2011-01-07T02:38:00.000-08:00

GSM Alarm burglar system with wireless sensors
I buy that item from ebay. There are a lot of a such alarm system, that when an alarm is triggered (from PIR, contact or fire/smoke sensors) an SMS is sent (the figure is mirrored).

I encountered a lot of difficulties during the initial setup phase so I decided to write a "manual"; the system auto learn the sensors, but the procedure and the cabling scheme are totally absent, so it's very very difficult to use.
More in deep, surfing the net (a lot), I discovered that this is a 2nd generation one, so all the manuals about the 1st generation (without auto learning) are totaly unuseful, and finally the wireless siren need a bizzarre autolearning procedure (while the cabling is simply ... not present in the manual).

I think that the solution is good and very cost attractive but the lack of manual is a big big contro; there are so many flavours that the surfing is not so helpful but all the products (IC, etc) seems developed from one or two big chinese companies:
http://www.ecvv.com/company/chinapst/catalog/124815.html
http://www.autosecu.com/english/Product.asp?ID=212&show=3
Silicon Valley is the past as Shenzhen is the future ...

BTW ...

Central Unit:

it's a 2nd generation system, with autolearning of sensors
the sensors (PIR, contact open/door, smoke/fire, gas) trigger the abnormal situation, when alarm is received from the central unit, it send SMS up to five (or similar) pre-setup phone numbers
it support 2 partitions (but I cannot able to use the inner one, so I "declared" all sensor in the external one), 16 (some more) wireless zone and 3 wired zones
1 relay output (2 contacts) to drive a home appliance (100W max), and 2 open collectors (SMS driven)
two ways/accesses for the setup: SMS or wireless keyboard (that "fillup" a zone)
remote controllers have 4 button: out arm, home arm (only "external" sensors), disarm and direct alarm (the "siren" button)
sensors can be all-deleted (no partially) or added:

hold the reset and power on to total delete (sensors, zone names, phone numbers)
power on AND hold on reset for 1 second to go into "inner auto learning " or "home arm" (It does not work for me) ... wait 20 secs to automatically exit
simply power on, without intervention to go into "outer auto learning" or "out arm" (20 secs)

ordered add:

I want setup the environment offline, declaring PIRs first and door/open then, because each zone has a customizable SMS text, but only the first five (5) have dedicated message; from 6th to 16th zones there is an unique message text that shall be sent when an alarm triggered, btw the last part of each message report the zone (f.e. "wireless activated (07)" is the default)
go into "outer auto learning"
power the fire (circular) sensor (via test button), after a central unit blinking power off the sensor
power on the PIR, and power off after central unit blinking
power on the open/close contacts and put away the two parts (basically to learn a sensor, it must send an alarm), and power off
press the alarm (siren) key in each remote controller (each one fillup a zone)
press the panic sensor/button
the sequence allow to assign dedicated/explicit message to most important sensors (fire, etc), and reserve the general/unique message for secondary ones (6-16 zones)

sensor jumper switches:

all sensor have two main group of jumpers A0-A7, D0-D3; incongruent settings inhibit correct behavior
1st generation systems required that "A"jumper reflect the "host number" (a label on back side of the central unit, each digit had 0, 1 or 2 value); with 2nd gen it's unuseful (auto learn), so I assigned an unique code to each sensor
in my working configuration each sensor (PIR or contact) MUST have the SAME "D" bits value (i.e. D0-D3=LHNN=0, 1, NC, NC is a possible one)
timer (default) = 5 secs
select rx (default) = 4.7M (3-4)
len on/off (default) = on

Sensors:

PIR: on/off switch, customization: led on/off, delayed start
open/close contact: wireless transmitter, working method/setup similar to PIR; 3,5 cm to trigger the alarm
smoke/fire: little siren, no jumper, auto-learned by the system in the usual way

wireless Siren (big trouble):

various models (strobe, light, wired, etc) exist, I have the wireless light one (I have no cables from siren); the manual is scrap and the two main problems are cabling and auto-learn
a such sirens can act as a standalone system (that auto learns sensors, without a central unit too) or as a normal siren controlled by a central unit
auto-learn

as a controlled siren (i.e. not a standalone system) could be necessary to register the central unit into the siren
power on the central unit with the transmitted connected and powered, wait the completition of the startup process; put (if not) in disarmed state
power on the siren, wait 1 minute the end of startup
hold on the small black button on the left side of the siren (delete all), after beep/flash press the button; to be sure cycle power (follow the previous step)
press and leave the black button, the green led start blinking, the 3 red ones flash, and and a strong beep will be auditable
use a remote controller or a panic button to raise an alarm, i.e. the system is disarmed, but with panic or "siren" button in the remote the system is armed and raise the alarm; wait the siren beep/flash (the wait could be till 1 minute) and the re-press the black button in the siren ....
OK system is registered into the siren

cabling

the basic schema is the one in the figure, the transmitter would use a different frequency from central unit - sensors (i.e. 315 MHz siren vs. 433 MHz sensor or viceversa)
transmitter uses a bypass to power itself: normally the manuals does not specify where connection take in place, if to the central unit or siren; the correct is connect the bypass to the central unit, place the transmitter as far as possible (30 cm cable is provided ...)
connect the single cable of transmitter to the "siren" contact of the central unit; the same that is used for the indoor siren
the siren has two holes and a button: connect the power adapter (the bigger one), don't use the jack (similar to a stereo-hifi one)
in my case the wireless receiver is already integrated into the siren (remember "wireless light siren" nickname); the one above is the most complete scheme suitable for wired-wireless siren

Surely to be useful, Good luck.

rmz250-stage2

2008-12-07T15:36:00.001-08:00

rmz250-bare

2008-12-04T01:14:00.001-08:00

rmz bare

ktm06

2008-10-12T23:38:00.001-07:00

2 foto: montagnana e portoviro

2008-09-09T02:59:00.000-07:00

30-8-2008 montagnana

1 settimana prima a porto viro

mi piace il segnale stradale ;-)

montagnana 2008-08-23

2008-08-24T16:12:00.000-07:00

Raduno a montagnana con i tinga-members.

diabolik r + mensili

2008-06-23T02:57:00.000-07:00

13 diabolik, di cui 3 "R" (prima ristampa) e 10 mensili

Nick Raider Speciali + Mensili

2008-06-19T20:30:00.000-07:00

Nick Raider albi mensili 1-12, 100 (a colori), e speciali 1-5.

mx/vr/5-apr-08

2008-04-05T14:37:00.001-07:00

Ciao,
primo corso ... primo incontro con un tinga.

akai mp3/fm radio 2 GB

2008-01-07T13:23:00.000-08:00

Lettore MP3 Akai con radio FM, 2 GB.

HP5110

2007-11-22T01:53:00.000-08:00

HP 5110 multifunzione (all-in-one) a getto d'inchiostro (inkjet): scanner (e fotocopiatrice), stampante e fax.

Caratteristiche:

fax gruppo 3 CCITT/ITU standalone o gestibile tramite computer a colori e b/n; memorizza fino a 70 pagine in assenza di carta
RAM 8 MB
stampante in quadricromia (1 cartuccia C6615D 15 o 25 ml x nero + 1 C6578D 78 o 19 ml x colore), fino a 12 pagine in nero e 10 a colori al minuto
linguaggio di stampa HP PCL III
interfaccia PC USB 2.0 (compatibile 1.1)
fotocopiatrice con zoom 25-200 %
scanner 600 x 1200 dpi (1200x1200 con interpolazione), 24 bit

Condizione ottime, nessun striscio o graffio; normalmente rimaneva sempre coperto. CD, manuali, quick start e alimentatore come da dotazione standard (anche se non in foto), scatola originale. Sostituito un anno e mezzo fa in toto (con uno nuovo) tramite supporto HP.

Cartuccia nero praticamente esaurita, colore ancora buona. Le cartuccie riciclate funzionano, da evitare quelle di concorrenza.

T1000 Thin Client

2007-11-22T01:35:00.000-08:00

Compaq T1000 Thin client, 8 MB Flash/32 MB RAM, completo di trasformatore. Trattasi di client Terminal Server, ed in particolare con supporto per protocolli RDP e ICA.

Alcune caratteristiche:

Expansion Slots Total (Free):

2 x memory
1 x PC Card (nascosto dalla protezione sul retro)

Interfaces:

2 x serial - RS-232C - 9 pin D-Sub (DB-9)
1 x display / video - VGA - 15 pin HD D-Sub (HD-15)
1 x mouse - generic - 6 pin mini-DIN (PS/2 style)
1 x keyboard - generic - 6 pin mini-DIN (PS/2 style)
1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
1 x parallel - IEEE 1284 (EPP/ECP) - 25 pin D-Sub (DB-25)
1 x USB 1.1 - 4 PIN USB Type A
1 x audio - line-In - mini-phone stereo 3.5 mm
1 x audio - line-out - mini-phone stereo 3.5 mm

KTM EXC '94

2007-11-16T06:53:00.001-08:00

KTM 250 EXC '94 (ovvero 2T), bollo pagato/regolarizzato fino a fine 2007, senza assicurazione. Non è stata oggetto di revisione perché ferma in garage da anni.

L'ho ripresa in mano quest'anno per ripartire con il cross dopo anni di "assenza", poi dopo alcune uscite ho acquistato un SX 250.
Plastiche ed estetica molto ben tenute (sono quelle viola), solo l'espansione della marmitta è un pò ruggine.
Riguardo alle sospensioni il mono dietro è un pò sgonfio, le forcelle originali upside-down le avevo fatte al tempo sostituire con delle Marzocchi Magnum dritte. La moto, a parte i primi 2 anni iniziali, poi è rimasta ferma in garage fino a quest'anno.
Entrambe le gomme sono state cambiate all'inizio di quest'anno, e quindi sono praticamente nuove visto che l'ho usato solo sulla terra di Vanzo (Monselice).
Non ha nessun particolare problema, ne di avviamento ne di carburazione (uso benzina v-power miscelata con 100Ml ogni 5 lt).

Prima di usarla l'ho portata a mettere a posto da Collina a Bologna.

Di seguito alcune foto:

PLC Allen Bradley completo

2007-10-20T14:17:00.000-07:00

Allen Bradley PLC serie Control Logix composto da:

n. 1 Chassis 7 slot 1756-A7/B
n. 1 Alimentatore 1756-PA72/B
n. 1 CPU Logix 5555 1756L55M13 - manca la batteria tampone
n. 1 ControlNet Bridge 1756-CNB/D
n. 1 Hight Speed Counter 1756-HSC/A con morsettiera
n. 2 Scheda 32 DI 24Vdc 1756-IB32/A con morsettiera
n. 1 Scheda 32 DO 24Vdc 1756-OB32/A con morsettiera

Le schede non hanno la confezione, la configurazione è stata usata solo per test funzionali. Morsettiere, plastiche e connettori dello chassis (backplane) in perfetto stato.

Le varie foto:

sistema completo

chassis e trasformatore

modulo ethernet

counter

2 x Digital Input

digital output

ktm cd

2007-10-10T13:51:00.000-07:00

Repair manual engine 250/300/380 SX/MXC/EXC x motori 2 tempi (2 stroke engines), dal 1999 al 2006.

White Power KTM WP suspension repair manual (english, deutsch, espanol, francais, italiano e nederlands), montate sulle moto: KTM 125/200/250/300/380 SX/XC/EGS/EXC 2T (2 strokes) e 250/400/450/520/525/620/660 4T (four strokes EXC/RALLY/LC4/MX/SXF...), KTM LC8 950, Husaberg -VOR - Vertemati - GAS GAS - TM - SHERCO e altri con sospensioni White Power dal 1998 to 2006. Modelli:
3612 4681 BAVP UK.pdf
3612 BAEM UK.pdf
4054 4357 ROTA.pdf
4054 MXTA UK.pdf
4357 4860 MXMA frontfork UK.pdf
4357 ROMA UK.pdf
4860 MXMA 2003 UK.pdf
5018 PDS 1998 UK.pdf
5018 PDS 1999 UK.pdf
5018 PDS 2000 UK.pdf
5018 PDS 2001 UK.pdf
5018 PDS 2002 UK.pdf
5018 PDS 2003 UK.pdf
5060 EXTREME UK.pdf
DCC UK.pdf, PA UK.pdf, Tools UK.pdf

Gea numero 1

2007-10-03T13:29:00.000-07:00

Il numero 1 (Il baluardo) di Gea (ed Bonelli)

Nathan Never Alfa + Gigante

2007-10-03T11:35:00.000-07:00

Nathan Never Agenzia Alfa numeri 1-8, e 10-11 (ovvero manca il 9), e albo Gigante numero 1.

Brad Barron 2 e 11

2007-10-01T14:29:00.001-07:00

Brad Barron albi numero 2 e 11.

nathan never almanacchi + mensili + klonz

2007-10-01T13:57:00.000-07:00

Nathan Never almanacchi della fantascienza 93-96, albi mensili 63 e 179, e fuori serie "C'era una volta" (Nathan Never presente il Klonz).

New bike new life

2007-09-25T02:13:00.000-07:00

Changed KTM from SX '05 (defective gas) to SX '06.

Speciale Nathan Never 1-5

2007-09-21T09:32:00.000-07:00

Speciali Nathan Never dal 1 al 5, con i relativi 5 albetti allegati. Imbustati tutti singolarmente, condizioni da edicola/ottimi.

tubi freno r1 04-06

2007-09-17T11:50:00.000-07:00

Tubi freno anteriori e posteriore originali x Yamaha R1 my 04-06